Hydro Jetting · Tigard, OR
Hydro Jetting in Tigard, OR
A drain snake cuts through a clog and opens the line. Hydro jetting cleans the whole pipe — blasting roots, grease and years of buildup off the walls with high-pressure water. If your drain keeps coming back, jetting is what actually fixes it.
- Clears what snaking leaves behind
- Licensed and insured in Oregon
- Upfront pricing before any work starts
Snaking vs Jetting
Snaking vs Hydro Jetting — What's the Difference?
| Drain Snake (Cable Machine) | Hydro Jetting | |
|---|---|---|
| How it works | A rotating cable punches through the clog | High-pressure water (3,000–4,000 PSI) scrubs the pipe clean |
| What it clears | Opens a path through most clogs | Removes roots, grease, scale and debris from the entire pipe wall |
| Leaves behind | Grease coating, root fragments, buildup on walls | A pipe that's essentially clean from end to end |
| Best for | Quick fix, soft clogs, a one-time backup | Recurring clogs, grease buildup, root problems, prep before lining |
| How long it lasts | Shorter — the leftover buildup attracts new clogs | Much longer — nothing for clogs to catch on |
Most drain calls start with snaking. We recommend jetting when a drain keeps clogging on the same schedule, when grease buildup is the issue, or before a sewer line repair or lining so the pipe is clean going in.
When to Jet
When Hydro Jetting Is the Right Call
Snaking opens it but the clog comes back. Jetting removes the root fragments and wall buildup that the snake left, so there's nothing for the next clog to catch on.
Grease sticks to pipe walls and accumulates over years. In a kitchen line that's never been jetted, there can be significant buildup reducing the pipe diameter. Jetting scrubs it out.
Snaking cuts through roots and opens the line. Jetting cuts them out more completely and flushes the debris. Combined with a camera inspection, it shows whether the entry points need to be repaired.
The pipe needs to be clean before lining resin is applied. We jet the line first to make sure the liner bonds to the pipe wall, not a layer of grease or sediment.
When the whole house drains slowly, the buildup is usually in the main line. Jetting the main clears it from the bottom up and restores full flow.
Commercial grease traps and kitchen drain lines need regular jetting to stay compliant and clear. A line that's never been jetted in a restaurant can be almost fully blocked with grease.
How It Works
How Hydro Jetting Works
We run a camera to see what's in the line and confirm the pipe is in good enough condition to handle jetting pressure. A pipe with major cracks shouldn't be jetted — the pressure can make it worse.
We use a machine that generates water pressure up to 4,000 PSI through a specialized nozzle. It's water only — no chemicals that could damage the pipe or the sewer system.
Different nozzle heads for different problems — a spinning chain nozzle cuts roots, a forward-facing nozzle breaks up hardened grease, a rear-facing nozzle flushes debris back down the line.
We run the camera again after jetting so you can see the clean pipe and we can confirm everything cleared out properly.
What to Expect
How the Service Works
Tell us which drain or line and how long it's been a problem. We schedule the visit.
We run a camera to see what's in the line and make sure it can handle jetting pressure.
We tell you the cost for jetting and anything else we recommend. No surprises.
We feed the jetting hose through the cleanout or access point and work from the problem area back toward the main.
We run the camera again, show you the clean pipe and explain if anything needs a follow-up repair.
Transparent Pricing
Hydro Jetting Cost in Tigard
| Service | Typical Cost |
|---|---|
| Residential main line hydro jetting | $350 – $600 |
| Kitchen drain line jetting | $250 – $450 |
| Sewer line jetting with root cutting | $400 – $700 |
| Commercial line jetting | $500 – $1,200+ |
| Camera inspection (add-on or standalone) | $175 – $450 |
Prices vary by line length, access and what's in the pipe. You get the price before we start.
Local Knowledge
Hydro Jetting in Tigard: What to Know
Roots are the top reason Tigard residents jet
Tigard has a lot of mature trees. Root intrusion is the most common cause of repeat drain and sewer clogs here. Snaking cuts them back, but the roots come back through the same gaps. Jetting cuts more thoroughly and buys more time. Combine it with a camera inspection and sewer line repair to keep them out for good.
Old pipes need a camera check first
Many Tigard homes have clay or cast iron sewer lines that are 40–60 years old. These can have cracks and offset joints. We always run a camera before jetting older lines to make sure the pipe can handle the pressure and that we won't cause more damage than we fix.
Grease buildup is a kitchen drain issue
Even if you're careful about not pouring grease down the drain, cooking residue accumulates over years in kitchen branch lines. In a home that's 20+ years old, the kitchen drain may have significant buildup that's narrowing the pipe diameter. Jetting clears it completely.
Coverage
Hydro Jetting Near Tigard
Tigard ZIP codes: 97223 97224 97281
Common Questions
Hydro Jetting Questions
Same Drain Clogging Again? Let's Actually Fix It
Hydro jetting clears what snaking leaves behind. Call for upfront pricing and same day scheduling.